Microshield Universal bracket Accommodates both Microshield oval and round 500ml bottles. Features: Clean simple design Versatile bracket options For both wall and bed-end placement Use with any Microshield 500ml product Holds product securely in place Application areas: Wall placement Placement at the handwash basin Patient bed-ends for easy product access Placement to encourage compliance and usage Instructions for use: Remove the separate bottle holder piece on the bracket by pushing up on the round tab on the underside bracket. This will release the bottle holder from the bracket. Insert your choice of Microshield 500ml product into the holder and then feed the bottle up through the neck opening of the bracket. Push the holder with the bottle down into the bracket. You will hear the holder ‘click’ into place. Do not discard the holder when replacing the product. If using the bed-end or hanging attachment – with the front of the bracket facing you, push the small plate with the 3 prongs into the bracket. Now line up and connect the hanging part of the attachment onto the back of the bracket. You should hear the part ‘click’ into place Dimensions and weights: Dimensions: (w x d x h) 90 x 80 x 195mm Weight: 130g Dimensions with bed-end attachment: (w x d x h) 90 x 120 x 195mm Weight: 175g Special Advice: To clean the universal bracket use a mild detergent to wipe over the surface or mikrozid® universal wipes. Do not use harsh chemical cleaners or disinfectants. *This product image is only for reference.
